DSO112A Upgrade Version 2MHz Touch Screen TFT Digital Mini Handheld Oscilloscope

6,000.00৳ 6,200.00৳  (-3%)

By phone, email or checkout in website, we will contact for delivery details.

Brand & Model DSO112A Upgrade Version 2MHz Touch Screen TFT Digital Mini Handheld Oscilloscope
Made In China
Condition Original Brand New
Phone-icon 01735363733, 01988879727 (10.00AM - 9.00PM)
Email-icon [email protected], [email protected]
Shipping in Dhaka & all over Bangladesh..
Easy return if eligible, so easy.
Quick friendly and professional support.
Pay online or when receiving goods.
DSO112A Upgrade Version 2MHz Touch Screen TFT Digital Mini Handheld Oscilloscope
✪ Please check and confirm the package content and the price before buying. After used no return.
✪ If you want to buy any products, you can order online for home delivery or visit our shop.
✪ Please feel free to Contact Us if you need any further information.
Features :

While keeping all performance of DSO112 this new model brings in the following improvements:
☆Maximum sensitivity was increased to 2mV/div (older version is 5mV/div) with lower background noises.
☆Fixed the vertical position mismatch problem found in the older model.
☆Save/recall up to 24 parameter presets. This allows quick setup for frequently performed measurements.
☆Preset titles can be customized for easy remembering and identifying.
☆Expanded and improved on-screen measurement displays which include frequency, Vmax, Vmin, Vavr, Vpp, and Vrms.
☆Added external trigger feature.
☆Provided a two-way serial control interface which can output data/measurements and receive commands. This will make the device suitable for integration to customer applications.
☆Replaced out-dated miniUSB connector with more popular microUSB connector.
☆Enclosure strength enhanced.

School after-school teaching practice and student development of electronic small production.
Audio equipment maintenance and circuits, electronic toys and remote control model car electronic circuits.
On-site repair common electronic equipment (air conditioning or industrial frequency power inverter, AC / DC switching power supply or inverter, elevator and building fire-fighting equipment, industrial control circuit).
Hardware maintenance or software debugging RS232, RS485, I2C, CAN and other communications interface circuits, LED display and keyboard scan driver circuit, brushless motor drive circuit.
Observing the slow signal changes needed for applications. (such as : relay and switch contacts jitter, battery charge and discharge curves, power supply load transient response characteristics of the temperature sensor measurements.)

Supply the electronic circuit. (SCR voltage regulator, power factor compensation, electronic energy-saving lamps, dysprosium lamp mercury lamp sodium lamp drive circuit xenon lights, etc.)
Freeze at any time waveform display. (HOLD function)
Unique rolling slow signal display, the display can be fully continuous signal, unlike SCAN mode will cause the signal display discontinuous.
Time cursors, can automatically calculate and display the time difference.
Voltage cursors can automatically calculate and display the voltage difference.
Square wave test signal comes 1000Hz / 3.3V.
To save / recall waveform acquisition.
PC upload waveform data.
Battery / USB-powered and built-in smart charger.

Specifications :

Number of Channel: 1
Analog Bandwidth: 0 – 2MHz
Sensitivity: 2mV/Div – 20V/Div
Sensitivity error: < 5%
Resolution: 8-bit
Input Impedance: 1M ohm
Maximum Input voltage: 50Vpk
Coupling: DC, AC, GND
Voltage measurement cursors available
Auto-measurement of Vavr and Vpp

Max Real-time Sampling Rate: 5Msps
Timebase: 1us/Div – 50s/Div
Record Length: 512 and 1024 variable
Time measurement cursors available

Trigger Modes: Auto, Normal, Single
Trigger Types: Rising/falling edge
Trigger Position: 1/8, 1/4, 1/2, 3/4, and 7/8 of buffer size
Trigger Source: internal, external
External trigger voltage range: 0 – 15V

Test Signal Generator
7 freqencies from 1Hz to 1MHz selectable.
Amplitude 3.3V fixed.

3.7V Li-ion battery / USB.
Supply Current: 300mA @ 3.7V (LCD backlight ON).
Built-in charger.
Dimension: 80mm x 70mm x 18mm
Weight: 85 gram (not including cables)

Package Includes
► 1 x DSO112A Touch Screen Oscilloscope with Battery
► 1 x Probe
► 1 x BNC Probe
► 1 x USB Cable
► 1 x User Manual


Easy Return

If there is any manufacturing fault or defective or wrong products delivered, you can Request for Return or Exchage or Full Refund within 3 Days after received the products.

Warranty Policy

Warranty Not Available


As Shown In The Picture

Please Note

Product Color, Sticker Printing & Shape may vary & always not same as shown in main image.

Be the first to review “DSO112A Upgrade Version 2MHz Touch Screen TFT Digital Mini Handheld Oscilloscope”


There are no reviews yet.

All Categories