Hantek DSO4202C 200MHz 2Channels Digital Oscilloscope & Function Waveform Generator

32,500.00৳ 32,950.00৳  (-1%)

By phone, email or checkout in website, we will contact for delivery details.

Brand & Model Hantek DSO4202C 200MHz 2Channels Digital Oscilloscope & Function Waveform Generator
Country of Origin Hantek China
Condition Original Brand New
Phone-icon 01735363733, 01988879727 (10.00AM – 9.00PM)
Email-icon [email protected], [email protected]
Compare
Hantek DSO4202C 200MHz 2Channels Digital Oscilloscope & Function Waveform Generator
The Hantek DSO4202C is an easy-to-use digital oscilloscope with 200 MHZ bandwidth, a minimum range of 500 μV /div, 1GS/s sample rate. The DSO4202C also comes equipped with a function generator.
✪ Please check and confirm the package content and the price before buying. After used no return.
✪ If you want to buy any products, you can order online for home delivery or visit our shop.
✪ Please feel free to Contact Us if you need any further information.
We never sell cheap quality and garbage to our customers, as we all know, electronics are always easier to have different kinds of problems and most of the seller can`t provide good after-sale service, we won`t want to be same with others, we just provide you durable and better products in a competitive price. So if you only consider cheap price, please go to find other sellers.
Product Description

Features:

200M bandwidths.
1GSa/s Real Time sample rate.
Large (7.0-inch) color display,WVGA(800×480).
Record length up to 24K.
Trigger mode: edge/pulse width/line selectable video/slop/overtime etc.
USB host and device connectivity, standard.
Multiple automatic measurements.
Four math functions, including FFTs standard.
Provides software for PC real-time analysis.

Specification:

Model DSO4202C
Sample Rate Sampling Rate Range: 1GSa/s
Equivalent Sample Rate: 25GSa/s
Normal Normal data only
Peak Detect High-frequency and randon glith capture
Average Wavefom Average, selectable 4,8,16,32,64,128
Inputs Coupling AC, DC, GND
Inpits Impendance 1MΩ±2% 20pF±3pF
Probe Attenuation 1X, 10X
Supported Probe Attenuation Factor 1X, 10X, 100X, 1000X
Maximum Input Voltage CAT I and CAT II: 300VRMS (10×)
CAT III: 150VRMS(1×);
Installation Category II: derate at 20dB/decade above 100kHz to 13V peak AC at
3MHz* and above. For non-sinusoidal waveforms, peak value must be less
than 450V. Excursion above 300V should be of less than 100ms
duration. RMS signal level including all DC components removed through
AC coupling must be limited to 300V. If these values are exceeded,
damage to the oscilloscope may occur.
Sample Rate Range 1GS/s
Waveform Interpolation (sin x)/x
Record Length 40K
SEC/DIV Range 2ns/div to 40s/div
Sample Rate and ±50ppm(at over any ≥1ms time interval)
Delay Time Accuracy
Position Range 2ns/div to 10ns/div;
(-4div x s/div) to 20ms;
Vertical Resolution 8-bit resolution, all channel sampled simultaneously
Position Range 2mV/div to 10V/div
Bandwidth 200MHz
Rise Time at BNC( typical) 1.8ns
Analog Bandwidth in Normal and
Average modes at BNC or with probe, DC Coupled
2mV/div to 20mV/div, ±400mV; 50mV/div to 200mV/div, ±1V
500mV/div to 2V/div, ±40V; 5V/div, ±50V
Math +, -, *, /, FFT
FFT Windows: Hanning, Flatop, Rectamgular, Bartlett, Blackman;
1024 sample point
Bandwidth Limit 20MHz
Low Frequency Response (-3db) ≤10Hz at BNC
DC Gain Accuracy ±3% for Normal or Average acquisition mode, 5V/div to 10mV/div;
±4% for Normal or Average acquisition mode, 5mV/div to 2mV/div
DC Measurement Accuracy,
Average Acquisition Mode
When vertical displacement is zero, and N ≥16:± (3% × reading + 0.1div + 1mV)
only 10mV/div or greater is selected;
When vertical displacement is not zero, and N≥16: ± [3% × (reading + vertical position)
+ 1% of vertical position + 0.2div]; Add 2mV for settings from 2mV/div to 200mV/div;
add 50mV for settings from 200mV/div to 5V/div
Volts Measurement Repeatability,
Average Acquisition Mode
Delta volts between any two averages of ≥16 waveforms acquired
under same setup and ambient conditions
Trigger Types Edge, Video, Pulse, Slope, Over time, Alternative
Trigger Source CH1, CH2, EXT, EXT/5, AC Line
Trigger Modes Auto, Normal, Single
Coupling Type DC, AC, Noise Reject, HF Reject, LF Reject
Trigger Sensitivity
(Edge Trigger Type)
DC(CH1,CH2):
1div from DC to 10MHz; 1.5div from 10MHz to 100MHz; 2div from 100MHz to Full;
DC(EXT):
200mV from DC to 100MHz; 350mV from 100MHz to 200MHz;
DC(EXT/5):
1V from DC to 100MHz;1.75V from 100MHz to 200MHz;
AC: Attenuates signals below 10Hz;
HF Reject: Attenuates signals above 80kHz;
LF Reject: Same as the DC-coupled limits for frequencies above
150kHz; attenuates signals below 150kHz
Trigger Level Range CH1/CH2: ±8 divisions from center of screen;
EXT: ±1.2V;
EXT/5:±6V
Trigger Level Accuracy( typical)
Accuracy is for signals having rise
and fall times ≥20ns
CH1/CH2: 0.2div × volts/div within ±4 divisions from center of screen;
EXT: ± (6% of setting + 40mV);
EXT/5: ± (6% of setting + 200mV);
Set Level to 50%(typical) Operates with input signals ≥50Hz
Video Trigger Type CH1, CH2: Peak-to-peak amplitude of 2 divisions;
EXT: 400mV;
EXT/5: 2V
Signal Formats and Field Rates,
Video Trigger Type
Supports NTSC, PAL and SECAM broadcast systems for any field or any line
Holdoff Range 100ns ~ 10s
Pulse Width Trigger Mode Trigger when (< , >, = , or ≠); Positive pulse or Negative pulse
Time Range 20ns ~ 10s
Over Time Mode Rising edge or Falling edge
Time Range 20ns ~ 10s
Trigger on CH1 Internal Trigger: Edge, Pulse Width, Video, Slope
Trigger on CH2 Internal Trigger: Edge, Pulse Width, Video, Slope
Readout Resolution 6 digits
Accuracy (typical) ±30ppm (including all frequency reference errors and ±1 count errors)
Frequency Range AC coupled, from 4Hz minimum to rated bandwidth
Signal Source Pulse Width or Edge Trigger modes: all available trigger sources
The Frequency Counter measures trigger source at all times, including when the
oscilloscope acquisition pauses due to changes in the run status, or acquisition
of a single shot event has completed.
Pulse Width Trigger mode: The oscilloscope counts pulses of significant magnitude
inside the 1s measurement window that qualify as triggerable events, such as narrow
pulses in a PWM pulse train if set to < mode and the width is set to a relatively small time.
Edge Trigger mode: The oscilloscope counts all edges of sufficient
magnitude and correct polarity.
Video Trigger mode: The Frequency Counter does not work.
Cursor Measurement Voltage difference between cursors: V
Time difference between cursors: T
Reciprocal of T in Hertz (1/ΔT)
Auto Measuerment Frequency, Period, Mean, Pk-Pk, Cycli RMS, Minimum, Maximum, Rise time, Fall Time,
+Pulse Width, -Pulse Width, Delay1-2Rise, Delay1-2Fall, +Duty, -Duty, Vbase, Vtop, Vmid,
Vamp, Overshoot, Preshoot, Preiod Mean, Preiod RMS, FOVShoot, RPREShoot, BWIDTH,
FRF, FFR, LRR, LRF, LFR, LFF
Waveform Impedance DC-25MHz
Sample Rate 200MHzDDS
Output Waveform Arbitrary wave/square wave/sine wave/triangle wave/trapezoidal wave/pulse wave/DC
Frequency Resolution 0.1%
Waveform Depth 4KSa
Vertical Resolution 12bit
Frequency Stability <30ppm
Waveform Range ±3.5V Max
Output Impedance 50
Output Current 50mA Ipeak=100mA
System BW 25M
Harmonic Distortion -50dBc(1KHz),-40dBc(10KHz)
General Features
Display
Display Type 7 inch 64K color TFT (diagonal liquid crystal)
Display Resolution 800 horizontal by 480 vertical pixels
Display Contrast Adjustable (16 gears) with the progress bar
Probe Compensator Output
Output Voltage( typical) About 5Vpp into ≥1MΩ load
Frequency(typical) 1kHz
Power Supply
Supply Voltage 100-120VACRMS(±10%), 45Hz to 440Hz, CAT
120-240VACRMS(±10%), 45Hz to 66Hz, CAT
Power Consumption <30W
Fuse 2A, T rating, 250V
Environmental
Size Length 385mm, Width 200mm, Height 245mm
Weight 3.5KG(with Packing); 2.08KG(without Packing)
Package Includes
  • 1Pcs (LRT705) Hantek DSO4202C 200MHz 2Channels Digital Oscilloscope & Function Waveform Generator
  • 2Pcs Passive probes
  • 1Pcs Power cable
  • 1Pcs USB data cable
  • 1Pcs CD (Software and User’s guide)

...............................

Weight 3.100 kg
Color

Off White

Easy Return

If there is any manufacturing fault or defective or wrong products delivered, you can Request for Return or Exchage or Full Refund within 3 Days after received the products.

Warranty Policy

Warranty Not Available

Please Note

Product Color, Sticker Printing & Shape may vary & always not same as shown in main image.

Be the first to review “Hantek DSO4202C 200MHz 2Channels Digital Oscilloscope & Function Waveform Generator”

Reviews

There are no reviews yet.

All Categories